Arborcoat Oil Semi-Transparent

Stains

Exterior Stain

Description

A semi-transparent stain enhances the beauty of wood by adding colour and minimally obscuring the wood grain. Great for those who are looking to add a touch of colour to existing wood tone.
Provides excellent durability and UV protection with a deeply penetrating oil formula as well as creates a mildew resistant finish.

PLEASE NOTE

All tinted stain is non-returnable

PRODUCT NUMBER

K328

add to cart

Choose Size

Gallon

GallonST

Select Quantity

Select Colour

Garrison Red

Beaujolais

New Pilgrim Red

Bison Brown

Fresh Brew

Santa Rosa

Barn Red

Sweet Rosy Brown

Rabbit Brown

Fox Run

Terra Mauve

Georgian Brick

View More See our stain prep guide

Need Help ?

Provides excellent durability and UV protection as well as a mildew resistant finish
Deeply penetrating oil formula
Enhances the beauty of wood by adding colour and minimally obscuring the wood grain
Clean-up with Mineral Spirits
Longer dry time
Best for exterior wood surfaces such as decks, fences, siding and exterior furniture that have never been stained or where previous stain was removed or faded
Not recommended for hardwood substrates (e.g. Mahogany, Teak, and Ipe)
Can be used after proper prep over top new wood or wood previously stained in a semi-transparent or translucent opacity that has faded over time, is in good condition, and is similar in colour

Be mindful of weather conditions. You should not be working in direct sunlight, as the stain will dry too quickly and possibly cause failure and/or lap marks. It is also not recommended if the weather is too hot, cold, windy or raining.
Make sure your wood surface is properly prepped. Check out the Exterior Prep Guide for helpful tips.
Make sure wood surface is clean and dry. Ideal staining conditions would allow for 2-3 days of no rain before and after application while maintaining a consistent temperature 10°C.
Recommended application is with a brush, working in sections (e.g. 2-3 boards at a time). Only stop at natural breaks.
You can apply stain by roller or spray, however, you must still back brush to ensure an even finish.
When applying stain, make sure to start from a dry section of wood working back into wet to avoid lap marks.
On vertical surfaces, apply stain from the bottom up to avoid drip marks.
One coat application is recommended for best results.
Stain will dry to touch in 6 hours. For decks, allow 48 hours before regular foot traffic.